Process · Article
A hydrometer is the cheapest piece of measurement equipment and the one that answers the only question that matters before packaging: has fermentation finished?
Two readings a few days apart answer the question. Without them, bottling is a guess, and bottling an unfinished batch is how bottles explode.
Measurement is its own category in the catalogue, separate from the fermenter and the kettle, which is a hint about how often it is forgotten.
The first reading tells you where fermentation started. The second, taken days later, tells you whether it has stopped. A single reading tells you almost nothing on its own.
Take both at the same temperature, or correct for the difference. A hydrometer is calibrated at a specific temperature and drifts outside it.
Use a sanitised thief or turkey baster, and do not return the sample to the fermenter. Taste the sample instead — it is the cheapest quality check you have.
A refractometer needs only a few drops, which is convenient, but it needs a correction once alcohol is present. A hydrometer does not.
Two identical readings two or three days apart means fermentation is done. Then it is a packaging decision, covered in the bottle conditioning article.
The starter kit guide lists the measurement category alongside the rest of a complete setup.
A hydrometer is glass and will eventually break. Keep a spare, or accept that the day it rolls off the counter is the day you cannot bottle. It is the cheapest tool to duplicate.
Clean it with water only, and handle it by the stem rather than the bulb. The sample jar matters too: a tall narrow one needs less beer to float the hydrometer.
Record the readings in the same place each time. A number on a scrap of paper is lost by bottling day, and the whole point of measuring is the comparison.