Equipment · Article
Sanitation, measurement and packaging cross over cleanly. Vessels and anything that touches sulfites often do not. Here is how the application tags divide the catalogue.
Brewing beer and making wine look like the same hobby with different ingredients. In practice they share the boring equipment and diverge on the pieces that matter most.
Each record in the catalogue is tagged beer, wine or both, which makes the overlap visible before you spend.
Sanitation, measurement and bottling equipment is tagged for both, because the job is identical. A hydrometer does not care what is fermenting.
This is where a combined purchase makes sense: buy the shared categories once, at a quality you would not buy twice.
Fermenters and carboys vary by application, and wine equipment has to tolerate sulfites. Anything plastic that has held a heavily sulfited wine is a poor candidate for a delicate beer afterwards.
If you intend to do both, the safe pattern is separate vessels and shared everything else.
Mark the shared pieces by use rather than by material. A siphon tube that has carried sulfited wine is cheap to replace and expensive to mistake, so colour-code tubing and keep the wine set in its own box.
Bottles are the exception worth planning for. Beer bottles take crown caps and wine bottles take corks, so the packaging category splits even though the filling process is shared. Buy the closure you need for the batch in front of you, not the one you might need later.
Wine is usually made in larger batches than a first beer kit, so a five-gallon carboy may be the shared item while the kettles differ.
The starter kit guide lists capacities across the catalogue, and the beer and wine equipment guide groups the records by application.
If the two hobbies will share a shelf, plan the larger batch first. A vessel that is oversized for a small beer batch wastes headspace and oxygen; one that is undersized for a wine kit is simply the wrong purchase.