Process · Article
A brew day is a sequence of equipment handoffs. Knowing the order tells you which pieces you need before you shop, and which can wait.
First brew days go wrong in predictable places: something is not sanitised, the wort is too warm when yeast goes in, or there is nothing clean to put the finished beer in.
Walking the sequence before buying equipment is the cheapest way to avoid all three. This article follows the process from water to packaged beer and names the equipment category used at each stage.
The kettle is the first category: it has to hold the batch volume you chose. After the boil, the wort has to come down to a temperature the yeast can handle, which is what a wort chiller is for — or, for small batches, a sink full of cold water.
Batch capacity is recorded per item, and mismatch here is the most common first purchase mistake. A five-gallon fermenter with a one-gallon kettle cannot make a five-gallon batch.
Sanitation is its own category in the catalogue, and it is the one place not to economise. Everything downstream of the boil — fermenter, lid, airlock, siphon, bottling bucket — needs to be clean and sanitised.
This is also why a starter kit is worth considering: it bundles the fermenter, airlock and basic sanitation in one purchase, so the first batch is not missing a piece. The starter kit guide walks through which categories a complete setup needs.
Fermentation needs a stable temperature, which is what the temperature-control flag identifies. Measurement equipment — hydrometer or refractometer — tells you when fermentation has finished; bottling equipment gets the beer into a package that can hold pressure.
Not every item records a capacity or skill level, so check the category before building a list around a batch size. The temperature control guide covers the equipment that can hold a set point.