Packaging · Article

Bottling or kegging: the decision that shapes the rest of the setup

Packaging determines what equipment you need at the end of the process, and how much space the whole hobby takes. Here is the honest comparison.

Updated 2026-11-21 · 5 min read · FermentLab

Bottling is cheap to start and tedious to repeat. Kegging is expensive to start and quick to repeat. The catalogue stores bottling and corking as its own equipment category, which is the point where the two paths diverge.

Which one is right depends on how often you brew and how much space you have, not on which makes better beer.

Bottling: low entry, high effort

Bottles, caps and a capper are the minimum. Bottling buckets and a siphon make the process tolerable, and a bottling wand stops the mess.

The hidden cost is storage: a five-gallon batch is roughly two cases of bottles, and bottles take up more room than a keg because they cannot be stacked while conditioning.

Kegging: high entry, low effort

A keg, a regulator, a gas bottle and a fridge are the entry cost, and none of it is in the bottling category. The payoff is that packaging a batch takes minutes rather than an evening.

Kegging also changes the space calculation: a kegerator needs a permanent footprint, which the catalogue records per item as compact, standard or large.

A pragmatic middle path

Start with bottling for the first few batches, then decide. If you are still brewing after six months, kegging pays for itself in time rather than money.

If you brew wine as well as beer, bottling equipment is shared and the calculation changes. The beer and wine equipment guide covers which categories overlap.

Bottle conditioning also needs a priming calculation, which means measuring sugar per batch rather than per bottle. A bottling bucket with a tap makes that even mixing possible; adding sugar to individual bottles rarely gives a consistent result.

The buying guides behind this article

  • Beer or wine: which equipment you can shareRecords here are tagged for beer, wine or both. If you brew one now and might brew the other later, the application field is the one that decides what you can buy once.
  • What has to be in a first homebrew kitA starter kit is not just a fermenter. This guide walks through the equipment categories in the catalogue, the batch sizes available, and the pieces people forget to check.

More articles from FermentLab